How To Install Drop In Truck Bed Liner | Step By Step DIY Guide
Table of Contents
The Drop In Truck bed liners are designed to be placed on the flatbed and sides of the pickup truck. We also call it truck bed rubber mats. These truck mats/liners can be installed to prevent the accumulation of dirt, dust, liquid spillage and any other substances that could be damaging to the truck bed. The bed liners also protect against scratches, dents, paint chipping and rust. The one-piece mat/liner unit fits snuggly against all sides of the truck bed to prevent moisture from accumulating underneath. It also acts as waterproof and allows water that comes it’s a way to drain out easily from the bed, it also resists gasoline, oil and most of the chemicals that fall on it while driving. In this article you can get step by step DIY procedure to install drop in truck bed liners.
Mostly bed liners are made of rubber which minimizes the risk of damage coming to the product and holds each item in a specific position. It also acts as resistant to UV rays which in turn protects the color of bed liner and keeps it looking fresh and new. These can also be installed to keep the loaded items stationary and preventing them from slips and slides during sharp turns. Different types of truck bed liners are available in the market which could be installed easily without any expert’s guidance.
There are two types of bed liners: –
Drop-In Truck Bed Liner
Spray-In/On Truck Bed Liner
And Now, the particular Steps for Installation.
Once you’ve chosen your flooring liner, follow these simple steps for a quick DIY truck bed liner installation.
Steps To Install Drop In Truck Bed Liner
- Step 1Clean the truck bed fully and wipe down any dirt or dust with a cleaning solvent and permit the flooring to dry fully before laying down the bed liner.
- Step 2Before you begin the installation make sure the side and corners of the bed liner are flexed down to make sure any fold from the packaging is removed.
- Step 3Position your bed liner within the bed of the truck. If it’s a one-piece liner, merely drop it into place and adjust the sides according to the bed of a truck. Tuck in the corners wherever required. For multiple-part liners, you’ll need to position the front and side panels first. Then, the lowest parts will snap into place, interlocking with the front and side panels, thus making for a perfect bed liner.
- Step 4Secure your one-piece liner or the front and side panels of a multiple-piece liner with the kit’s provided fasteners. Some one-part liners might need addition bolts, sometimes into the manufacturer’s pre-drilled holes.
- Step 5Check the sides for a correct match and fix them if required.
- Step 6Some extra and special instructions are also given in the user manual provided with the product. Follow those instructions carefully for additional details and for better fitting of the bed liner.
Conclusion
Drop-in truck bed liners / mats can be easily installed and can also be easily removed for cleaning whereas spray-in bed liners require the coating to set properly to the bed liner and cannot be easily removed for cleaning. This is a very helpful article if you don't know how to install a drop-in truck bed liner? So, it is always advisable to use drop-in truck bed liners for time-saving, cost-saving and for user-friendly installation. Drop-in truck bed liners are custom-moulded for the desired model of the truck and can easily fit in without doing the desired measurements and cutting to make it messy and fussy for the people who install them on their own. They allow the use of bed caps for a clean and factory-installed appearance. So, use the drop-in bed liners for smooth and fuss-free installation. The procedure is almost the same for every pickup truck. No matter which brands you are using like Toyota, Ford, Chevy etc.