How To Spray Truck Bed Liner? | The Right Way To Do It
Table of Contents
Every year millions of trucks and pickups get sold. To maintain your truck and pick, it is essential to protect the truck bed. It is important to protect the truck bed as it is the one that handles your cargo. Hauling in and out of the cargo can cause serious damage to the bed. In fact, over time, it also experiences the scratches and dents. These things can lead to some serious issues like rust, cracking and peeling. It is also possible that you are peeking through a hole in it in one day.
To protect it, you definitely need the bed liner. Truck bed liners are the best way to protect it and prolong the life of your truck. However, you can choose any bed liner as there is a wide range available from roll-out bed rugs to drop-in plastic polyethylene liners. It is a kind of permanent as well as a durable solution. It will guarantee maximum protection.
Moreover, the use of spray-on bed liners preserves the design and contour features of the bed. At the same time also contribute to features of protecting the cargo and other elements.
Pre-Requisites of Spray Truck Bed Liners
Spray-on truck bed liners are those that will protect the metal body as well as frame of the truck as it provides protection against the air and water. In addition, it also provides protection against corrosion and rust. When corrosion starts, then it will be a matter of days to damage the truck bed. Spray-in bed liners will develop the airtight bond and it will prevent the moisture build-up and will also provide UV protection.
In fact, the truck bed liner helps in keeping the cargo in its place as it creates a resistant surface. Keep in mind that the truck bed is the part that is used to tow any item. Spray-on bed liners will work effectively and it will adhere to the bed in the perfect manner. You can also check how to install drop in truck bedliner
To save your pocket, it is better to opt for bed liner but the question is how to spray truck bed liner. To get the best result, truck owners must take care of the following things before the use of spray bed liner. There are two major ways to spray the bed liner. The first one is you can spray using truck bed liner spraying guns and the second one is you can use paint roller. You can check most useful and good quality truck bed liner spray guns for your reference.
Remove Accessories :
Remove a tailgate and accessories from pickup and truck. Either sweep or vacuum the dirt and debris from the truck bed. Make sure that all holes and drains are clear. With the help of water and TSP, scrub the bed and tailgate. The scrubbing helps in removing the oil, wax base residue and petroleum.
You might have the feeling of use of chemical removers and scrapers. Wash it with the clean rag, user wiper, and water. In the end, after washing the bed properly, leave it to get dry.
Mask off The Required Areas :
Make the use of painter tape for the purpose of masking and masking off the areas which you wish to keep uncovered. Near the tailgate and back of the truck bed are the common areas included in this category. Just press the tape down gently to create the protective seal. Moreover, cover all the drain holes with the tape and seal them properly.
Scuff Painted Surface :
To make the perfect bond, one needs to scuff all the painted surfaces. The truck owner needs to work on glossy areas. To create the texture, it is important to use the sandpaper on rust areas. Creating the texture on the bed liner will help the spray to adhere to the surface of the bed liner properly. However, after using sandpaper, remove all the sanding dust either by wiping down or blowing.
Clean Out All The Dust And Debris :
In the process of sanding the surface, paint chips and debris sometimes sit behind and these must be removed. So, vacuum the surfaces to eliminate paint chips, debris and dust. On ignoring these, you may have the problem of bubbles.
Apply either the rust converter coat or primer coat on bare and uncovered areas. Now, let it dry. It will take only a few minutes to get it dry. After that, use the acetone for wiping the bed area. Now, give acetone some minutes to sit on the surface. It must be followed by wiping the surface carefully. Leave the surface.
Clean Out All The Dust And Debris :
In the process of sanding the surface, paint chips and debris sometimes sit behind and these must be removed. So, vacuum the surfaces to eliminate paint chips, debris and dust. On ignoring these, you may have the problem of bubbles.
Apply either the rust converter coat or primer coat on bare and uncovered areas. Now, let it dry. It will take only a few minutes to get it dry. After that, use the acetone for wiping the bed area. Now, give acetone some minutes to sit on the surface. It must be followed by wiping the surface carefully. Leave the surface.
Brush :
With the assistance of paint mixer and power drill, mix the material. Before applying the material, make sure that you stir the mix properly. Start applying the mix from corners and seams. If your priority is thinner mixture than the normal one, then you can add xylene in the mixture.
When seams and corners are completed, to cover the rest of the area, use a roller to do the same. It must be followed by applying the mixture to front panels as well as side ones. Then, roll the mixture over the tailgate and back side.
Now, cover the bed’s floor. It is the first coat.
Start applying a second coat on the taped edges. However, only after the drying of the first coat, one should start with the second one. In fact, for touch up, you can make use of the small brush. It will help in covering the area that you have missed by chance.
Once you are done with the roller cover, discard it. A plastic bag must be used to wrap the brush. In case, you feel like it is an excess mixture, then use xylene. Make sure that you use xylene only when the mixture is wet.
In 5-6 hours, the first coat will get settled. Only after settling on the first coat, you should start with the second one.
Pre-Requisites of Spray Truck Bed Liners
It is important to follow the instructions of manufacturers as it will make the task of how to spray truck bed liner easy. The instructions assure that the truck owner applies the mixture correctly. Applying bed liner correctly will save your money as well as time.
Reading the instructions properly will save you from hiring a professional and spending a lot of money. Apart from all of these, you need not a pick the truck from the company as you will get the job done on your own.
Are you thinking of how to spray truck bed liner without any tools? Then it’s time to take a look at the following important tools.
- Gloves
- Acetone
- Screwdriver
- Safety Glasses
- Xylene
- Masking tape
- Sandpaper
- Paint roller or Spray In Bed Liner Gun
You need to use the apply quality spray in bed liner. So, learn the whole process and it will assure that you will get the desired and good results. Step by step applying the spray bed liner will protect the bed liner of the truck.
Frequently Asked Questions (FAQ) :
Conclusion
How to spray truck bed liner is not a very difficult task and it is very important to make sure that truck bed has a liner. It is a great thing for the truck bed. The truck bed line will help in preventing the scratch and wear & tear of the truck bed.
Following instruction, while applying the spray the bed liner will ensure that the job is done perfectly. A protected bed liner will give you a long haul. Set spray bed liner will make you tension free for dented metals and chipped metals.
Even, if the spray bed liner is damaged in some area, then one can easily recoat it and get the protection again.